KHX5 Elegant Wheelbase Carbon Fiber FPV Racing Frame Kit

Product information:

Color: Elegant GEP-KHX5

5-inch parameters:

Name: GEP-KHX5 Elegant

Weight: 120g

Wheel base: 230mm

Maximum supported blade: 5inch

Size: 210 * 178mm

Boom thickness: 4mm

Thickness of upper plate: 2mm

Plywood thickness: 1.5mm

Side plate thickness: 1.0mm

Introduction:

An elegant upgraded version, the model is GEP-KHX5. The biggest feature is to reduce the loss cost. We will use the Hybrid-X scheme to redesign the split arm. The wheelbase has been reduced to 230mm. It still remains stable and centralized. It is suitable for Freestyle and competition. In addition, we have made some minor adjustments in details, such as a 3D printout, which makes it easier to fix the 5.8g antenna and 2.4g antenna for image transmission.

GEP-KHX5 is also named “Elegant Elegant” because we hope to design it as an elegant rack.

In structure, the most important feature of “Elegance” is that the center point of the battery is balanced, so that the center of gravity of the whole battery is in the middle. This design is conducive to a solid turning feel during the competition and is not easy to drift. Moreover, with this design, the force efficiency is more even, so that the power supply of the four motors is even, reducing the heat of the motor, and increasing the use efficiency of the battery. In addition, we use the large wheel base of 230mm and HybridX design

In terms of materials, all the carbon plates are made of 3K pure carbon fiber plates with high-precision CNC split arm. For the camera and video camera base, we selected 7075 high-strength aviation aluminum for high-precision processing, which is finely docked with the carbon plate, and its hardness is 50% higher than that of the traditional carbon plate design, so that the pilot can fly more boldly and confidently, and it is not easy to damage the equipment. However, we still control the weight at 120g.

On the electronic equipment, “Elegant” is equipped with LED tail light board (including buzzer, which requires CF/BF support). The whole machine is made of YFS screws with 12.9 strength, which is not easy to rust, and has sufficient strength.

“Elegance” is a good new choice for Freestyle or competition installation.

Packing list:

Frame Kit*1